Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in San Bruno, CA | Timberline Contractors
We provide independent CGI service across San Bruno, from quartz countertop installs to full kitchen and bath remodels built around CGI cabinetry. The thing that separates our CGI work here from a flat-lot city up the Peninsula is simple: we check what’s under the floor before we set a single cabinet. San Bruno’s 1950s hillside tracts over the fault trace move, and CGI materials only perform when the foundation beneath them is doing its job. Call (866) 253-5808 for a free estimate. We’re local, we’re independent, and we bring the full CGI sales & service knowledge to every job.
Why San Bruno Residents Choose Us for CGI Service
Most crews can hang a cabinet. Few can tell you why the cabinet run on a Crestmoor split-level will rack out of square within two years if the original post-and-pier foundation is never re-leveled. Nelson Fung, our owner and San Bruno General Contractor, learned the trade at Los Angeles Trade-Technical College and spent years on hillside remodels before founding Timberline Contractors. He’s the one who walks a San Bruno job with a level and a flashlight before pricing anything, because he’s seen too many “quick weekend projects” turn into six-week structural discoveries. That’s the approach we bring to every CGI install and repair in San Bruno. We spec OEM hinges, slides, and touch-up components, we’re honest when aftermarket hardware is the better call for a damp crawlspace, and we never put new material on top of a moving foundation.
Styles & brands we work with
Common CGI Construction Problems We Solve in San Bruno
San Bruno’s fog belt and hillside lots create a specific set of failures for CGI products. Here’s what we see most:
- Quartz countertops cracking at unsupported overhangs. When a house’s original 1950s pier foundation settles unevenly, that movement transfers straight through the cabinet run and into the stone. We find hairline cracks at peninsula overhangs on CGI quartz tops regularly in the Sneath Lane tracts.
- RTA cabinet boxes swelling and delaminating at the base. Tuck-under garages and vented crawlspaces in San Bruno push damp air up through the floor year-round, thanks to the persistent summer fog. The toe-kick and lower panels on RTA boxes absorb that moisture and start to blister.
- Backsplash tile and grout failing along the bottom courses. Exterior stucco walls stay damp for long stretches in the fog belt, and that moisture wicks through to the interior wall cavity. Bottom-row grout cracks and tiles pop loose on backsplashes and shower surrounds.
- Cabinet doors and drawer fronts racking out of square. When a partial seismic retrofit levels the house but nobody re-levels the subfloor in the kitchen, the cabinet boxes sit on a slight twist. Doors bind, gaps open up, and the hardware wears unevenly.
- Quartz tops pulling away from walls or seams separating. On sloped lots where drainage wasn’t addressed during the original build, seasonal soil movement shifts the house enough to open seams at the countertop-to-backsplash joint.
CGI Service in San Bruno: What Local Conditions Mean for Your Equipment
The Crestmoor and Sneath Lane hillside tracts sit directly over the San Andreas Fault trace on 1950s post-and-pier foundations. On a kitchen or bath job here, we routinely find the original piers out of level by an inch or more, with the floor framing sagging toward the downhill side. A crew that works the flat inland Peninsula cities can set a CGI cabinet run on that floor and walk away, and six months later the homeowner is calling us about cabinet doors that won’t close and a quartz top with a crack running from the sink cutout. The step those crews skip is the one that matters most in San Bruno: re-leveling or bracing the piers before any material goes in. We check it first because we’ve been burned enough times to know the foundation is always the job. Nobody can set a level cabinet run on a floor that’s an inch out of plane, and no part fixes a shifting pier.
We learned this the hard way on a Crestmoor split-level off Sneath Lane. The homeowner wanted our Home Remodeling in San Bruno with new CGI RTA cabinets and a quartz island. Our tech found the original 1950s post-and-pier foundation under the kitchen out of level by over an inch, with cracked quartz at the old cooktop peninsula where the counter had already failed once. We bolted and braced the piers, re-leveled the subfloor with a vapor barrier against the crawlspace damp, then set the new CGI boxes and island on a shimmed, moisture-isolated base. The counters now run dead level and the cabinet boxes are holding square through two fog seasons.
CGI Models & Products We Service in San Bruno
We work across the full CGI product line: CGI Surfaces quartz countertops, CGI Ready-to-Assemble shaker and flat-panel cabinetry, CGI stone-look and ceramic tile for backsplashes and shower surrounds, and CGI interior and exterior door slabs and moulding. Our parts approach is straightforward: we use CGI OEM hinges, slides, and matching touch-up and panel components to keep the finish consistent. We switch to quality aftermarket hardware only where it’s genuinely better-rated for a wet or hillside environment, which happens often enough in San Bruno’s crawlspace-heavy housing stock that we keep common replacements ready for fast turnaround. You won’t wait two weeks for a hinge.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in San Bruno
What you’ll pay depends on what’s underneath the material. A straight cabinet swap on a level slab foundation runs the low end. A full kitchen on an out-of-level pier foundation with a retrofit and drainage correction runs the high end. Here’s where San Bruno CGI projects typically land:
| Service | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
Every estimate is free and written line-item, so you see exactly what the foundation, drainage, and material work costs separately. Call (866) 253-5808 and we’ll walk the floor and give you an exact number.
Serving San Bruno, CA — Our Local Coverage Area
We’re based in the San Bruno area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in San Bruno
No. Timberline Contractors is an independent CGI in South San Francisco area general contractor and CGI service provider. We’re not affiliated with, authorized by, or sponsored by CGI, and we don’t claim to be. What we are is a crew that has installed and repaired CGI quartz, cabinetry, and tile across San Bruno’s hillside tracts for years, and we spec their products because they hold up when the foundation work is done right.
We default to CGI OEM hinges, slides, and matching touch-up components to keep the finish consistent across the run. Where a specific part keeps failing in San Bruno’s damp crawlspace conditions, we’ll recommend an aftermarket option rated better for moisture or lateral movement and explain why. You get the final call, with our honest read on the tradeoff.
A cabinet or countertop swap on a level foundation typically runs two to four days for demo, set, and finish. When the job includes re-leveling piers or correcting subfloor slope, add two to five days depending on access from the crawlspace or tuck-under garage. We’ll give you a written schedule before we start, and it won’t surprise you halfway through. For an exact timeline, call (866) 253-5808.
We service CGI Surfaces quartz countertops, CGI Ready-to-Assemble shaker and flat-panel cabinetry, CGI ceramic and stone-look tile for backsplashes and shower surrounds, and CGI interior and exterior door slabs and moulding. If you have a CGI product not listed here, call us. If we can’t service it properly, we’ll tell you that too.
A full CGI kitchen remodel in San Bruno typically runs $14,000 to $45,000, depending on foundation condition, cabinet count, and countertop square footage. A hillside house on out-of-level piers sits at the higher end because the retrofit and re-leveling come before any cabinet goes in. Call (866) 253-5808 for a free written estimate and a line-item breakdown.
Service Areas Near San Bruno
We cover all of San Bruno’s 94066 ZIP code, including the Crestmoor and Sneath Lane hillside tracts, plus surrounding Peninsula neighborhoods. You’ll find our crews running CGI service in Pacifica along the coast and CGI service in Millbrae just north over the ridge. We also serve the broader San Bruno service area and adjacent Peninsula cities.
Book Your CGI Service in San Bruno Today
Do it right the first time or explain yourself twice. We walk the floor, check the foundation, and give you a straight number. Call (866) 253-5808 to schedule your free CGI service estimate in San Bruno.
Written by Nelson Fung, Owner & General Contractor at Timberline Contractors, serving San Bruno and the surrounding Peninsula.