Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Construction in Lompico, CA | Timberline Contractors
We provide independent Belgard paver, wall, and cap installation and repair across Lompico, and the thing that separates our work here is planning around access, grade, and drainage before a single paver gets laid. Lompico is not a suburban flat-lot job site. Steep canyon drives, narrow Lompico Road switchbacks, and CAL FIRE very-high severity zones all shape how a Belgard driveway or patio gets built here. Call (866) 253-5808 for a free estimate, and we’ll walk your site before we quote it.
Why Lompico Residents Choose Us for Belgard Service
We’ve set Belgard Lafitt Rustic Slab, Dublin Cobble, Mega-Bergerac, Dimensions, and Catalina pavers across the shaded canyon lots of the San Lorenzo Valley long enough to know how these products actually behave in Lompico specifically. Not in a showroom, not in a catalog photo. On a damp, redwood-shaded grade where moss shows up by February and runoff scours loose base rock by March.
That field experience comes from years of hands-on work. Nelson Fung, our owner and general contractor, learned the trade at Los Angeles Trade-Technical College and spent years on remodels and commercial builds before starting Timberline. He’s the one who’ll tell you a cheap base on a 15% grade costs twice as much as a proper one, because he’s already watched that mistake get made on someone else’s driveway. We bring the same direct approach as Belgard specialists to every Lompico Belgard job: specify the right base depth for the grade, use Belgard-brand edge restraint and polymeric joint sand rather than generic substitutes, and build the drainage into the design instead of hoping for the best. Do it right the first time or explain yourself twice.
Styles & brands we work with







Common Belgard Construction Problems We Solve in Lompico
Most Belgard failures we see in Lompico aren’t the pavers giving out. The pavers are usually fine. What fails is what’s underneath and around them. Here’s what we repair most often:
- Base failure and paver settling on steep graded driveways. Long private drives above Lompico Road channel runoff downhill during winter storms. That water scours the compacted aggregate base out from under the paver field, leaving pavers that rock, puddle, and eventually sink at the joints. The fix is re-excavating to proper depth, rebuilding the base, and re-setting edge restraint so water sheds off instead of through.
- Efflorescence and moss staining on lighter-toned slabs. Lompico’s deep shaded redwood and tanoak forest keeps patios and walkways damp much of the year. Lighter Belgard slabs like Lafitt Rustic or Catalina pick up white efflorescence and green moss faster here than they would in open sun. We clean, treat, and re-sand joints, and we’ll tell you honestly which paver tones hide canyon staining better.
- Edge restraint creep on retaining wall caps and paver borders. Seasonal soil movement on sloped, pier-and-beam-adjacent terraces pushes against Belgard wall caps and paver borders. The edge restraint starts to creep outward, joints open, and the field loses its locked edge. We reset restraint, re-lay the border course, and rebuild the joint sand so the edge stays tight through wet and dry cycles.
- Joint-sand loss and frost heave at the top of canyon grades. Hard winter freezes at Lompico’s higher elevations open paver joints and let water drive under the field. What starts as a little sand washing out becomes a paver that shifts an inch every storm. We re-sand with Belgard polymeric joint sand and correct the slope so water runs off instead of sitting in the field.
- Runoff tunneling under paver driveways that drain toward the canyon cut. On lots where the driveway dips before the house pad, storm water tunnels under pavers and washes away base in channels you can’t see until the field sinks. We add drainage swales or channel drains at the break point, then rebuild the base and field so water has somewhere to go that isn’t under your pavers.
Belgard Service in Lompico: What Local Conditions Mean for Your Equipment
Lompico is an unincorporated canyon community in the Santa Cruz Mountains, reached via narrow, winding Lompico Road off the Zayante/Felton corridor near Belgard repair in Felton. Projects here go through Santa Cruz County permitting, not a city building department, and the county’s requirements around fire-hardening, defensible space, and erosion control shape nearly every hardscape job. A Belgard paver driveway or patio in Lompico has to be designed with permeable setbacks, proper drainage, and non-combustible zones in mind. The CAL FIRE very-high severity designation means retaining walls and paved areas near structures often need to double as defensible space, which changes how close you can build to the house and what materials you spec at the edge.
On top of that, the access problem is real. A dump truck may not make the turn onto a steep private drive off Lompico Road. A pallet of pavers may need to be staged at the road and walked up in small loads. We plan that before ground breaks. Half the cost surprises on a Lompico Belgard job live in access and staging logistics, not in the pavers themselves. That’s why we site-walk every quote instead of pricing from a satellite photo.
Belgard Models & Products We Service in Lompico
We install and repair the Belgard lines that hold up best in canyon-grade conditions: Lafitt Rustic Slab and Dublin Cobble pavers for driveways and paths, Mega-Bergerac and Bergerac retaining wall systems for slope terracing and grade changes, and Dimensions or Catalina slabs for patios and walkways. On repairs, we spec Belgard-brand base, edge restraint, and polymeric joint sand rather than generic substitutes. The joint and edge system is what keeps a paver field locked together on a slope, and Lompico grades punish shortcuts there. Where a section of pavers is still sound and only the base or edge has failed, we reset and re-base rather than tear out the whole field. But on Lompico’s slopes, a failed base usually means that section gets rebuilt properly, because the same water that undermined it once will do it again if you just top-dress the joints.
See the difference
Before
After
Before
After
Before
AfterBelgard Service Pricing in Lompico
What you pay depends mostly on access, grade, and existing base condition. A flat patio off a wide driveway is one number. A steep 400-foot drive off Lompico Road with staging by small load is a different conversation. Here are the ranges we work within:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Sealing | $250 – $700 |
Every estimate includes a site walk, a written line-item quote, and a straight answer about whether a cheaper base spec will hold on your grade or cost you twice as much in three years. Call (866) 253-5808 to schedule yours.
Serving Lompico, CA — Our Local Coverage Area
We’re based in the Lompico area and know this community well, with experience extending to Belgard in Mount Hermon. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Belgard Construction in Lompico
They affect it directly. Lompico sits in a CAL FIRE very-high severity zone, so Santa Cruz County requires paved areas and retaining walls near structures to support defensible space requirements. That means wider non-combustible setbacks, careful placement of paver fields relative to the house, and drainage designs that don’t direct water into erosion-prone slopes. We plan the hardscape around those county conditions from the start. Call (866) 253-5808 to talk through your site.
No, and that’s on purpose. We’re an independent contractor. We don’t answer to a manufacturer sales quota, so when we recommend a Belgard paver or wall system, it’s because it fits a Lompico driveway or patio, not because we’re pushed to move product. We buy Belgard in Brookdale materials for our clients and install them to the manufacturer’s spec, but we work for you.
Most driveways and patios take between five and ten working days once materials are on site. The wild card in Lompico is access and staging. If pavers have to be staged at Lompico Road and walked up in small loads, that adds a day or two. If the base needs full re-excavation down to grade, that adds more. We give you a written schedule before we start, and we don’t disappear mid-job.
Lafitt Rustic Slab, Dublin Cobble, Mega-Bergerac and Bergerac retaining walls, and Dimensions and Catalina slab pavers. Those cover most Lompico driveway, patio, walkway, and retaining wall needs, and they’re the lines we know hold up on steep, damp canyon grades when the base and edge are done right.
Full driveway replacement runs $5,000 to $14,000 depending on square footage, grade, and how much base needs re-excavation. If only a section has failed and the rest is sound, we can often re-base and reset just that section for less. Call (866) 253-5808 and we’ll give you an exact number after a site walk.
Service Areas Near Lompico
We run Belgard service throughout the San Lorenzo Valley and beyond. That includes Belgard service in Ben Lomond for driveways and retaining walls on similar canyon terrain, and Belgard service in Bonny Doon for paver patios and slope work. Our full Lompico service area covers the 95005 ZIP and the surrounding Santa Cruz Mountains communities.
Book Your Belgard Service in Lompico Today
If your Belgard driveway is rocking at the joints or your patio has turned into a moss sponge, call us. We’ll walk the site, give you a written quote with line-item pricing, and tell you exactly what your grade and drainage demand. Call (866) 253-5808 to schedule your free estimate.
Written by Nelson Fung, Owner at Timberline Contractors, serving Lompico and the San Lorenzo Valley.