Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Construction in La Selva Beach, CA | Timberline Contractors
We provide independent Tremron paver and retaining wall installation, repair, and re-leveling across La Selva Beach (ZIP 95003). What sets our Tremron work apart here is straightforward: we rebuild paver beds for dune-adjacent sand and salt fog, not for showroom conditions. Every job starts with the question of what the marine layer and winter surf will do to the base in five years. Call (866) 253-5808 for a free estimate on Tremron paver driveways, patios, and segmental walls in La Selva Beach.

Why La Selva Beach Residents Choose Us for Tremron Service
Most contractors can lay a paver. Fewer have watched Tremron units behave over multiple fog seasons on sandy, wind-scoured lots a few hundred yards from Monterey Bay. That’s the difference. Nelson Fung grew up around materials debates and learned the trade formally before spending years running remodels and builds across California, and he runs Timberline Contractors with a simple rule: “Do it right the first time or explain yourself twice.” In La Selva Beach, that means we don’t shortcut base compaction on sand. We don’t skip geotextile separation fabric. We don’t treat joint sand as an afterthought. When you call us, you get the same crew that has torn out failed paver patios off Sand Dollar Drive and rebuilt them to hold through storm season. We are an independent installer working with Tremron products and are not authorized, sponsored, or endorsed by Tremron.
Styles & brands we work with







Common Tremron Construction Problems We Solve in La Selva Beach
- Salt-driven efflorescence and surface pitting. The onshore fog that rolls through La Selva Beach carries chlorides that bloom through paver surfaces faster than inland. Where joints weren’t properly filled with polymeric sand, we strip, clean, re-sand, and seal so the white haze doesn’t keep returning.
- Washed-out joint sand and rocking pavers. Winter storm surf and wind-blown sand scour joint sand from Tremron paver courses along the beach side of the community. Units start to shift and rock, then edges chip. We re-level, re-set, and re-sand with a polymeric product that actually grips in coastal conditions.
- Lean and bulge in segmental retaining walls. Tremron Stonewall and similar blocks set into dune-adjacent slopes fail when base compaction and drainage weren’t engineered for sandy soil. We tear out, re-grade, install proper drainage behind the wall, and rebuild so it doesn’t lean again.
- Rust jacking at paver field perimeters. Chloride and moisture attack steel edge restraints on Tremron installs near the coast, causing the metal to expand, lift, and spall adjacent pavers. We replace with corrosion-resistant restraint systems and reset the affected edge units.
- Base settlement on sandy lots. Standard shallow excavation doesn’t hold on La Selva Beach’s dune-adjacent soils. We use a geotextile-separated aggregate base so the Tremron paver field stays even instead of developing ruts and heaves after the first winter.
Tremron Service in La Selva Beach: What Local Conditions Mean for Your Equipment
La Selva Beach sits on dune-adjacent sand and bluff-edge grades, and that changes everything about how a Tremron paver bed has to be built. A contractor working inland Santa Cruz County can dig down a few inches, drop in some base rock, compact it, and move on. That approach fails here. The sandy subgrade shifts under load, and without a geotextile separator the aggregate base works its way down into the sand until the pavers above it settle and heave. Add winter storm surf saturating the ground from the side and the whole field can wash toward the grade. We’ve rebuilt enough of these to know: if the base and drainage aren’t engineered for sand and surf, the prettiest Tremron patio in La Selva Beach is a three-year warranty claim waiting to happen. That’s why we tie every paver field into the lot’s existing grade drainage and never skip the separator fabric.
Tremron Models & Products We Service in La Selva Beach
We work with the Tremron paver lines most commonly specified along this part of the coast: Sierra and Cambria-style interlocking pavers in tumbled and non-tumbled finishes, Cobblestone and Mega-Bergerac large-format units for driveways and patios, and SienaStone and Stonewall segmental retaining wall blocks for grade changes and dune-edge walls. For repair work, we spec genuine Tremron-compatible units and matching edging hardware where available. Where the spec allows, we use quality aftermarket polymeric joint sand and drainage components, because near the coast skimping on those two things will cost more than the pavers ever did. When units are still sound we re-level, re-set, and re-sand rather than replace them. We only swap in new units when spalling or breakage is structural. For full installation scope, see our Tremron sales & service page.
See the difference
Before
After
Before
After
Before
AfterTremron Service Pricing in La Selva Beach
What you pay depends on what’s under the pavers, not just what’s on top. A simple re-sand runs low. A full base rebuild with geotextile and new edge restraints runs higher. Here’s where typical Tremron work lands in La Selva Beach:
| Service | Typical Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Sealing | $250 – $700 |
| Driveway Replacement | $5,000 – $14,000 |
A free estimate from us includes a walk of the site with a look at drainage, existing base, and restraint condition. Call (866) 253-5808 to schedule one in La Selva Beach.
Serving La Selva Beach, CA — Our Local Coverage Area
We’re based in the La Selva Beach area and know this community well, with Aptos Tremron service also available nearby. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Tremron Construction in La Selva Beach
Does Tremron paver joint sand really wash out faster at La Selva Beach?
Yes. Wind-blown sand and winter storm surf scour joints faster here than anywhere inland in Santa Cruz County, which is why we use a polymeric sand rated for coastal exposure and recommend sealing the joint system when the paver field sits within a few hundred yards of the surf line. Call (866) 253-5808 for an exact recommendation based on your lot.
Can you install a Tremron driveway on a sandy La Selva Beach lot?
Yes, but the base has to be engineered for it. A standard shallow gravel base won’t hold on dune-adjacent soil. We use a geotextile-separated aggregate section with proper compaction and edge restraints, then set the Tremron units on top. Skip the engineering and the driveway will sag within two winters.
Will salt air damage my Tremron pavers or retaining wall blocks?
Salt-laden fog accelerates surface pitting and efflorescence on Tremron pavers if joints aren’t sealed. Retaining wall blocks hold up structurally in salt air, but the steel reinforcement and drainage components behind them need to be corrosion-resistant. We address both in every La Selva Beach install.
Do you need Coastal Commission or county permits for a Tremron paver patio in La Selva Beach?
It depends on the lot. La Selva Beach is unincorporated Santa Cruz County, and projects within the coastal zone can trigger county coastal permitting requirements, especially on bluff-edge or dune-adjacent parcels. We can tell you what your specific site will require based on lot location and project scope.
Is a Tremron retaining wall safe on a sloped dune or bluff lot?
Yes, when it’s engineered for the slope. We build Tremron segmental retaining walls with proper base compaction, geogrid reinforcement where the height and grade demand it, and drainage behind the wall. A wall built without those elements on a La Selva Beach slope will lean and bulge within a few seasons.
Service Areas Near La Selva Beach
We run Tremron service from La Selva Beach service area up and down the coast and into the foothills. If you’re nearby, we cover the Aptos corridor, Rio del Mar, Seacliff, and Capitola. To the south we work through Watsonville and into the Pajaro Valley. For neighbors further north, see Tremron service in Amesti or Tremron service in Freedom.
Book Your Tremron Service in La Selva Beach Today
If your pavers are rocking, your joint sand is gone, or your retaining wall is starting to lean, get it looked at before the next storm season. Call Timberline Contractors at (866) 253-5808 to schedule Tremron service in Day Valley or a free Tremron estimate in La Selva Beach.
Written by Nelson Fung, Owner & General Contractor at Timberline Contractors, serving La Selva Beach and the surrounding coastal communities, including Tremron in Rio Del Mar.