Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Colma, CA | Timberline Contractors
We handle independent Mr-Glass shower enclosure and glass work across Colma as your General Contractor – Colma, measuring, templating, and installing the glass ourselves rather than passing it to a subcontractor. The thing that makes Mr-Glass work different in Colma is the fog: persistent damp air keeps shower glass and frames perpetually wet, so seals and hardware fail faster here than in the next town over. Call (866) 253-5808 and we’ll walk you through what your enclosure actually needs.
We’re Mr-Glass sales & service specialists, but we’re not tied to Mr-Glass corporate and not an authorized shop. That independence means we call parts and failures as we see them, not as a warranty flowchart tells us to. Our crews know the housing stock in the 94015 ZIP specifically, so we understand what a Mr-Glass enclosure is up against in this town.
Why Colma Residents Choose Us for Mr-Glass Service
We’ve re-hung and re-sealed enough Mr-Glass enclosures in Colma to know exactly where the hardware gives out first. The bottom sweeps crack and mildew within a season or two. The bypass door rollers gum up with soap scum and mineral film and the doors start jumping the track or dragging. The semi-frameless pivots loosen at the wall jamb as stucco and tile move with moisture cycling, and then water weeps behind the frame and onto the floor.
Nelson Fung, our owner and general contractor, learned the trade in Los Angeles and spent years on remodels where the difference between a substrate done right and one slapped together showed up within eighteen months. He carries that same eye into every Mr-Glass job we take in Colma, because the damp air here punishes sloppy work faster than almost anywhere else on the Peninsula. We quote the work straight, use Mr-Glass-spec or properly matched aftermarket hardware instead of forcing a universal kit into a track it was never designed for, and we don’t upsell a full replacement when a re-seal and a hardware swap will honestly outlast the enclosure.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Colma
- Jumping or dragging sliding bypass doors. Colma’s damp air leaves a mineral film on Mr-Glass tracks within months, and the rollers gum up until the door jumps its rail. We clean, re-gauge, and replace rollers with Mr-Glass-spec parts matched to the existing track profile, sized properly rather than forced.
- Cracked and mildewed bottom seals. The fog belt keeps shower glass wet almost year-round, so Mr-Glass vinyl sweeps and bottom seals dry, crack, and grow mildew in a season or two. We swap in fresh sweeps and re-align the door so the seal seats evenly against the curb.
- Weeping water at the wall jamb. On semi-frameless Mr-Glass pivot enclosures, the hinge-side jamb loosens as the surrounding stucco and tile expand and contract with moisture cycling. We re-flash the jamb, reset the anchors, and re-hang the glass so the bevel closes tight.
- Pitted and corroded aluminum finishes. Enclosures on exterior-facing bathroom walls in Colma take the worst of it, with salt-tinged fog accelerating pitting on frame and hinge finishes. We replace corroded hardware and advise on finishes that hold up better given your bathroom’s exposure.
- Cracked or fogged Mr-Glass panels. Temperature swings between cool fog and hot showers stress tempered glass over time. We re-template and replace broken or compromised panels with custom-cut tempered glass matched to the opening, not a stock size that leaves gaps.
Mr-Glass Service in Colma: What Local Conditions Mean for Your Equipment
Colma is a town of about 1,500 living residents and over a million and a half buried ones, so the built environment here is not tract-home neighborhoods. It’s cemeteries, mausoleums, columbaria, a few commercial strips, and a long run of auto dealerships along the Junipero Serra/280 corridor. The residential work clusters in a compact pocket near the 94015 boundary with Daly City Mr-Glass service area, and the commercial renovation work runs along the retail strips. What that means for Mr-Glass owners is practical: most of our jobs in Colma are single-bath upgrades squeezed into tight footprints, where the shower enclosure has to fit an existing opening without the luxury of moving a wall. We template for the space that’s actually there, not the space a showroom drawing assumes. Contractors working Colma also navigate cemetery-owned land and a permitting structure built around cemeteries and dealerships rather than homeowners, so access windows and scheduling are not like a typical residential market. Our crews plan Mr-Glass work around those realities, in the compact residential pocket near the Daly City line and on the commercial strips along Junipero Serra, without pretending Colma is something it isn’t.
Mr-Glass Models & Products We Service in Colma
We work on the full range of Mr-Glass shower enclosures and glass work: frameless sliding shower door systems in the Barn Door and bypass styles, framed and semi-frameless pivot enclosures, custom-cut tempered glass panels and mirrors for remodels, and shower door replacement hardware kits covering rollers, hinges, and seals. On parts, we use Mr-Glass-spec or quality aftermarket components sized to the existing track rather than forcing a generic kit and hoping it holds. For Colma jobs we keep the common Mr-Glass rollers, sweeps, and hinge sets on hand, so a simple hardware swap doesn’t turn into a multi-week wait for parts.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Colma
Mr-Glass work in Colma spans a few clear line items, and the numbers below reflect what we typically see on jobs in this market. Frameless glass and walk-in shower installs carry the widest spread because the glass size, hardware grade, and sub-prep vary job to job.
| Service | Typical Range in Colma |
|---|---|
| Frameless Glass Shower Enclosure / Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
What moves the number is mostly glass size and whether we’re reusing an existing base or rebuilding the curb and sub-pan. The free estimate gives you a written line-item quote with the exact glass dimensions, hardware spec, and labor broken out, so there’s no round number handed over without an explanation. Call (866) 253-5808 to schedule yours, and we’ll tell you what your Colma enclosure actually needs, not what a catalog says it should cost.
Serving Colma, CA — Our Local Coverage Area
We’re based in the Colma area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Colma
Yes. We template and install frameless Mr-Glass enclosures in the compact residential pocket near the 94015 Daly City line regularly, working within the footprint you already have rather than asking you to move a wall, and we also cover Mr-Glass repair in Broadmoor. Call (866) 253-5808 and we’ll measure for a free estimate.
The rollers on Mr-Glass bypass doors gum up with soap scum and mineral film in Colma’s damp air, and once they seize the door starts to drag or jump the rail. We re-gauge the track, swap in Mr-Glass-spec rollers sized to the existing profile, and align the door so it closes without a fight. Call (866) 253-5808 for a track and hardware assessment.
Sometimes, but not in the way most people assume. If the glass is intact and the frame is square, a re-seal and hardware swap usually costs a fraction of a replacement, but if the glass is cracked, etched, or the frame has pulled away from a wet wall, patching it can add up to the same spend as a new panel. We’ll give you an honest repair-versus-replace number during the free estimate. Call (866) 253-5808 to talk through your enclosure.
Yes. We handle Mr-Glass shower enclosures and custom glass for commercial strip renovations and dealership projects along the Junipero Serra/280 corridor in Colma, working around active service and visitation schedules as needed. Call (866) 253-5808 to discuss the scope and get a written quote.
Colma’s persistent fog keeps glass and frames wet longer, which means we pay extra attention to seal seating, jamb flashing, and ventilation so the new enclosure doesn’t start mildewing and corroding within its first year. A correctly flashed and aligned install handles the damp air fine, and a rushed one shows its problems fast. Call (866) 253-5808 and we’ll explain what your specific bathroom needs.
Service Areas Near Colma
Along with Colma service area coverage, we run Mr-Glass jobs up and down the Peninsula. Mr-Glass service in South San Francisco covers the warehouse and retail mix there, while Mr-Glass service in San Bruno reaches the residential hillside homes with fog exposure similar to Colma’s. We also serve Chinatown, the Mission District, and Daly City along the same corridor.
Book Your Mr-Glass Service in Colma Today
On a bathroom upgrade in the compact residential pocket near the Pacifica Mr-Glass service and Daly City line in the 94015 ZIP, our crew replaced a failing Mr-Glass semi-frameless pivot enclosure whose hinge-side wall jamb had loosened and was weeping water onto the tile. We re-templated for a frameless panel, swapped in fresh Mr-Glass-spec hinges and a new bottom sweep, and re-flashed the jamb before re-hanging the glass. The damp fog-belt air is unkind to old seals, and the homeowner got a tight, traceable enclosure instead of another leak. Do it right the first time or explain yourself twice.
If your Mr-Glass enclosure is dragging, leaking, or showing corrosion in Colma, call (866) 253-5808 for a free estimate. We’ll measure, diagnose, and give you the repair-or-replace number straight.
Written by Nelson Fung, Owner at Timberline Contractors, serving Colma and the Peninsula.