Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Belvedere, CA | Timberline Contractors
We’re Timberline Contractors, and we provide independent CGI cabinet installation and full kitchen remodeling across Belvedere. We are not a CGI dealer or manufacturer affiliate, though we also offer CGI service in Tiburon. What makes our CGI work different here is simple: we know how Belvedere’s hillside lots, design review process, and bayfront salt air combine to punish cabinet work that isn’t planned ahead, and we plan for it from the first measurement. Call (866) 253-5808 for a free estimate.
Why Belvedere Residents Choose Us for CGI Service
Cabinet installation in Belvedere is not the same job as cabinet installation in a flat, inland subdivision. We’ve spent years working on steep lots around the Lagoon and the west slope, where a level floor is rare and a straight wall is rarer. Nelson Fung, our General Contractor in Belvedere, learned cabinetry the long way, working remodels across Los Angeles before building Timberline into a firm that handles everything from foundation to ridge cap. He’ll tell you that a cabinet box is only as good as the substrate behind it. That’s why we shim bases, seal toe kicks, and check for the moisture and racking problems that show up in older Belvedere homes long before the first door goes on.
We’re a general contractor first, which means when we install CGI cabinets in Belvedere, the plumbing rough-in, the electrical, the drywall, and the flooring all line up with the cabinet schedule. One contractor, every phase. No finger-pointing when a drawer doesn’t clear an outlet or a toe kick doesn’t meet a tile line. Our brand partners include Cambria quartz, Kohler fixtures, and James Hardie siding, so the whole kitchen comes together under one roof. For a full list of CGI sales & service coverage, that page explains more about how we work with the product line.
Styles & brands we work with
Common CGI Construction Problems We Solve in Belvedere
These are the failure modes we see most often in Belvedere, and how the local environment makes them worse:
- Corroded hinges and drawer slides. Salt air off the Bay attacks CGI’s standard hardware on west-slope and lagoon-front exposures. Hinges bind, slides grind, and within a few years the drawer that used to close soft now needs a hip-check. We replace with corrosion-resistant stainless steel or marine-grade hardware that holds up to the same air every day.
- Swollen cabinet boxes and toe kicks. Many older Belvedere kitchens sit on slab-on-grade foundations with poor ventilation, and Bay moisture has been working on the MDF for decades before we open the wall. We see delaminated toe kicks and boxes that crumble at the base. When the box is structurally sound, we repair and reface. When water damage has gone through, we replace.
- Racking and joint separation in frameless cabinets. Hillside homes settle. Floors run out of level. CGI’s Euro-style frameless cabinets are precise pieces, and if they’re installed on a sloped floor without shimming and leveling, the joints open and doors misalign within months. This is the most common mistake we correct from previous installs.
- Finish fading on painted door fronts. Large waterfront windows look great and cook cabinet finishes. Strong afternoon sun through south and west glass fades painted CGI doors, especially darker colors. We can match and replace door fronts when the boxes are still good, saving a full tear-out.
- Permitting and sequencing headaches. Not a cabinet failure, but a project killer. We’ll get into this below, because it’s the one thing that costs Belvedere homeowners the most time and money.
CGI Service in Belvedere: What Local Conditions Mean for Your Equipment
Here’s the thing most contractors from off-island don’t know: Belvedere’s building department requires design review for nearly all exterior changes, and that can catch kitchen remodels by surprise. If your project changes a window or door opening, even as part of a kitchen remodel, you’re looking at a 4 to 6 week design review before you can pull the permit. During that wait, a contractor who ordered cabinets early is paying storage fees, risking damage, and eating restocking charges if the review changes the opening size. We sequence CGI cabinet ordering only after design approval lands, a discipline we’ve also applied to our CGI service in Sausalito. That ordering discipline has saved our Belvedere clients thousands in storage and restocking costs, and it’s the main reason our timelines hold while other projects stall. Nelson’s rule on this is simple: do it right the first time or explain yourself twice.
We serve the entire Belvedere service area, including homes along the Lagoon, the west slope, and the tighter streets where a delivery truck is a planned event, not a given. Narrow, steep roads with no shoulder mean a box truck can’t always reach the house, and a crane isn’t coming up some of those driveways. We plan material drops around parking restrictions and flaggers, not after the fact.
CGI Models & Products We Service in Belvedere
We work with the full CGI cabinet line: the Ready-to-Assemble (RTA) all-wood cabinets, Euro-style frameless cabinetry, and semi-custom Shaker and raised-panel doors. For replacement parts, we use CGI OEM doors, drawer fronts, and hardware when available, because exact fit and finish matter. For internal hardware, we specify upgraded corrosion-resistant aftermarket components where Belvedere’s bayfront air demands more than the standard spec. We keep common replacement hardware staged locally so a hinge swap doesn’t mean a two-week wait.
When cabinets are structurally sound but the finish is tired, we recommend repair and refacing before full replacement. When water damage or seismic retrofit work requires new framing, we’ll tell you straight, and we’ll show you what a full replacement actually costs before anything is ordered.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Belvedere
Here’s what CGI work runs in the market. These are planning numbers, and the final quote depends on access, condition of the substrate, and how much plumbing or electrical changes the job requires.
| Service | Typical Range |
|---|---|
| Full Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Countertop Installation | $2,000 – $6,500 |
The biggest cost driver in Belvedere is access and substrate condition. A sloped floor that needs three hours of shimming costs more than a flat slab. Salt-damaged framing behind the cabinets costs more than sound studs. Our free estimate walks you through the actual conditions at your house, not a generic square-foot number. Call (866) 253-5808 and we’ll put a real number on your job.
Serving Belvedere, CA — Our Local Coverage Area
We’re based in the Belvedere area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help, including CGI repair in Chinatown.
FAQs – CGI Construction in Belvedere
If your kitchen remodel changes any window or door opening, Belvedere’s design review adds 4 to 6 weeks before permits issue. We sequence CGI cabinet ordering after design approval to avoid storage fees and restocking charges if the review changes your opening dimensions. Call (866) 253-5808 and we’ll map the timeline for your specific project.
Yes, when installed correctly. CGI’s all-wood cabinet boxes hold up far better than MDF in bayfront conditions, but the standard hardware will corrode. We upgrade hinges and drawer slides to marine-grade stainless steel on water-facing exposures and seal toe kicks against moisture. The cabinet itself is fine; it’s the hardware selection and the installation details that determine whether the kitchen survives ten years of bay air.
The streets. Many roads around the Lagoon and west slope are narrow, steep, and have no shoulder for staging. A full truckload of cabinet boxes can’t always park at the door. We plan material drops with smaller vehicles or staged delivery, and we coordinate with the city when flaggers or parking permits are needed. We’ve never had a delivery fail, but we’ve watched other contractors try to improvise one and end up carrying boxes up a hill by hand.
For a straight cabinet swap with no changes to walls, plumbing, or electrical, no. Once you move a sink, alter a window, or open a wall, Belvedere’s permit process applies, and design review may kick in for exterior changes. We handle the permit application and sequencing for every job we run. If you’re unsure whether your project needs one, call (866) 253-5808 and we’ll tell you straight.
We shim the bases to true level, then seal the gap between toe kick and floor to keep moisture out. On severe slopes, we may build a level platform or adjust the base cabinets in sections so the countertop line stays straight. Frameless CGI cabinets are less forgiving of sloped floors than face-frame designs, which is exactly why proper shimming and leveling before mounting matters here more than almost anywhere else.
Service Areas Near Belvedere
We run CGI cabinet and kitchen work throughout the Bay Area. If you’re in San Francisco, the Mission District, or down toward Daly City, we serve those areas too. See CGI service in Daly City and CGI service in Marin City for details on those coverage zones.
Book Your CGI Service in Belvedere Today
If you’re planning a kitchen remodel, vanity replacement, or cabinet install in Belvedere, call us at (866) 253-5808. We’ll schedule a free estimate, walk the site, and tell you what the cabinets, the substrate, and the permit process will actually require. No shortcuts, no surprises.
Written by Nelson Fung, Owner at Timberline Contractors, serving Belvedere since our first hillside install.