Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Mission District, CA | Timberline Contractors
We provide independent KraftMaid cabinet installation, refacing, and kitchen construction across Mission District and the surrounding 94110 ZIP, and we also work with KraftMaid in San Francisco more broadly. We’re not a KraftMaid dealer or authorized service center. What makes us different is that we’ve fitted KraftMaid boxes into enough lot-line Victorians and Edwardians here to know exactly where the cabinets fight the house, and where the house wins. If you’re planning KraftMaid work in Mission District, call (866) 253-5808 for a free estimate and we’ll walk the space with you before you commit to a single box size.
Why Mission District Residents Choose Us for KraftMaid Service
Nelson Fung, our owner and general contractor, grew up watching his grandfather argue tile prices at the hardware stalls on Broadway in Chinatown, Los Angeles. That obsession with material quality stuck. He trained formally at Los Angeles Trade-Technical College, then spent years on remodels from Eastside bungalows to mid-size commercial builds before founding Timberline Contractors. When a Mission District homeowner asks whether a KraftMaid Vantage box will hold up against a soft-story garage wall, he can tell you exactly what happens when it doesn’t, because he’s pulled swollen toe kicks out of more than one of these basements.
We’ve installed and refaced KraftMaid cabinetry across dozens of Mission District kitchens, so we know how their door styles, box depths, and finish options actually behave in tight Victorian and Edwardian footprints. We use genuine KraftMaid OEM hinges, glides, fillers, and touch-up finish where the series is still supported, and we match quality aftermarket hardware only when an OEM part is discontinued. That matters when you’re standing in a 1910 kitchen with three different wall planes and a floor that drops an inch and a half from the range to the sink. KraftMaid sales & service work isn’t just about unboxing cabinets. It’s about knowing which end panels will swell first and which walls need shimming before the first box goes up.
Styles & brands we work with







Common KraftMaid Construction Problems We Solve in Mission District
- Swollen toe kicks and end panels from garage-level moisture. The soft-story garages under these 1880 – 1920s rows hold moisture that migrates up into the kitchen. KraftMaid particleboard and MDF end panels and toe kicks absorb it, swell, and delaminate long before the doors show wear. We replace those boxes with solid-plywood stock and match the existing fronts rather than patching over water damage.
- Racked boxes on out-of-square, off-plumb walls. Original lot-line walls in these wood-frame rows were rarely framed square. When KraftMaid factory boxes go in tight against an unshimmed wall, the cabinets rack, drawers drift, and doors rub at the reveals. We shim, scribe, and set boxes true before the fronts go on, so the finished run doesn’t fight itself.
- Sun-damaged thermofoil and painted finishes. The Mission is San Francisco’s sunniest district, and a south- or west-facing kitchen run takes sustained UV that fog-belt neighborhoods never see. We see yellowing, edge peeling, and finish checking on KraftMaid thermofoil and painted doors on those exposures. Choosing the right finish for the orientation of the room is part of the job, not an afterthought.
- Worn drawer glides and hinges on 1990s – 2000s KraftMaid remodels. Older series hardware wears loose in high-use galley kitchens. Replacement hinges for discontinued series can be a sourcing headache if you don’t match the original box drilling. We track down OEM-compatible parts when they exist and tell you honestly when they don’t.
- Forced fillers and bad reveals from pre-metric versus metric box depths. Some KraftMaid lines changed box depth specs between series generations. When a Mission District homeowner wants to add one new cabinet to an older run, the depths often don’t align without a custom filler or a shallow-depth box. We measure before you order, so you’re not stuck with a cabinet that juts an inch into the walkway.
KraftMaid Service in Mission District: What Local Conditions Mean for Your Equipment
Because so many Mission District Victorians and Edwardians were framed lot-line to lot-line, we survey for the property pin before we cut a back-wall run for KraftMaid cabinetry. The rear wall on these old rows was sometimes studded straight over the lot line, which means the kitchen box often has to be built shallower than the drawing assumed. We’ve seen original builders shoot studs right over a neighbor’s side wall and call it a day. You can’t hang a 24-inch-deep KraftMaid box on that wall without losing a few inches or creating a code violation. So we pull the survey, verify the pin, and then order or reface to the actual depth available, not the depth on the original floor plan. This is the kind of thing a generic KraftMaid page never mentions, and it’s the reason a Mission District kitchen can surprise a contractor who’s never worked these lots. To put it plainly: Mission District service area work demands more measuring and less assuming. Nelson’s signature phrase applies: do it right the first time or explain yourself twice.
KraftMaid Models & Products We Service in Mission District
We work across the KraftMaid line: Vantage, the all-plywood box series that holds up best in wet-wall conditions; Portrait, the full-access all-plywood series with clean slab and shaker fronts; Chatham and Chatham-style inset-look doors, which we’ve installed in tight Edwardian galleys where that flush, period feel matters; and Brookhill or Brookhill-style shaker doors, the workhorse for Mission District remodels that want a timeless look without chasing trends. For parts, we keep genuine KraftMaid OEM hinges, glides, fillers, and touch-up finish on hand for current series, and we carry quality aftermarket matches for discontinued lines. Our honest stance on repair versus replace: if the boxes are sound and only fronts and hardware are tired, reface or re-front. If the wet-wall or garage-wall panels are swollen, replace those boxes rather than patch over damage. On one Chatham-door KraftMaid galley in a circa-1905 Edwardian near 24th and Mission, the rear wall wasn’t plumb or on the pin, so we pulled the run off the wall, shimmed and scribed the boxes, and set the new doors true. The garage-level wet wall had swollen a toe kick and end panel, so we replaced those boxes with solid-plywood stock and matched the Chatham fronts rather than refacing over water damage.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Mission District
What you’ll pay depends on the scope, the condition of the existing boxes, and whether the walls cooperate. Here’s what we typically see in Mission District kitchens:
| Service | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
The wide range comes down to box condition, wall prep, and finish choice. A reface on sound boxes costs less than replacing swollen panels. Pulling a run off an unplumb rear wall to shim and scribe adds labor that a square suburban kitchen never needs. Our free estimate walks the space with you, checks the walls and the moisture points, and gives you a written line-item quote before you buy a single cabinet. Call (866) 253-5808 and we’ll set a time to come out.
Serving Mission District, CA — Our Local Coverage Area
We’re based in the Mission District area and know this community well, including nearby neighborhoods like KraftMaid repair in Noe Valley. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Mission District
Yes, we can often match a new KraftMaid box or door to your existing run, but the box depth and door profile have to be verified against the series you already have. Some older KraftMaid lines used different box depths or drilling patterns than current Vantage or Portrait stock, so a mismatch can show up as a proud box or misaligned hinge. We measure first and tell you exactly what will and won’t match before you order. Call (866) 253-5808 for a free measurement visit.
Most of the time, yes, but not without shimming, scribing, or reducing box depth. We survey for the pin before we cut a back-wall run, then build the cabinet depth to what the wall actually allows. That’s standard practice for us in Mission District; it’s not something every installer checks. Give us a call and we’ll verify your wall before you commit to a layout.
Refacing is worth it if the boxes are solid, dry, and square enough to accept new doors and veneers. If the toe kicks or end panels are swollen from garage-level moisture, refacing covers the symptom while the box continues to deteriorate. We’ll tell you which situation you have after a quick inspection. Estimates are free at (866) 253-5808.
Thermofoil and painted finishes on west- or south-facing windows take real UV punishment here, and we do see yellowing and edge peeling over time when the wrong finish goes in. A painted or stain-grade wood door generally handles the Mission sun better than thermofoil on those exposures. We factor window orientation into the finish recommendation before you order.
Interior kitchen cabinet work usually doesn’t trigger Historic Resource review on its own, but if your building is within the Calle 24 or Mission historic district and you’re changing the street-facing facade at the same time, the rules change. We also handle Chinatown KraftMaid service with the same attention to local requirements. We’ll flag any permit or review requirement before work starts. Call (866) 253-5808 and we’ll walk through what your specific address needs.
Service Areas Near Mission District
We serve the Mission District and surrounding San Francisco neighborhoods, with KraftMaid construction work from KraftMaid service in Buena Park to KraftMaid service in Hesperia, plus Chinatown and Cypress. If you’re within San Francisco or the nearby bay communities, we’ll come take a look.
Book Your KraftMaid Service in Mission District Today
Whether you’re refacing a tired run, replacing water-damaged boxes, or doing a full kitchen, we’ll measure, quote, and build it right. Call (866) 253-5808 to schedule your free estimate in Mission District.
Written by Nelson Fung, Owner at Timberline Contractors, serving Mission District, KraftMaid in Visitacion Valley, and the greater San Francisco Bay Area.