Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Mountain View, CA | Timberline Contractors
We service, repair, and install Jerith aluminum and vinyl fence systems across Mountain View, including the Eichler tracts and mid-century rancher neighborhoods where slab work gets complicated fast. The thing that separates our Jerith work here from a run-of-the-mill fence contractor: we know Mountain View’s radiant-heat slab hazard and the city’s permit culture before we ever set a post. Call (866) 253-5808 for a free estimate on any Jerith fence, gate, or railing project.
Why Mountain View Residents Choose Us for Jerith Service
We’ve worked on Jerith Signature Series aluminum ornamental fence, Jerith Elite vinyl privacy fence, and Jerith ProSeries vinyl panels in Mountain View long enough to know which footings hold in the disturbed fill around old rancher lots and which ones don’t. Nelson Fung, our owner and general contractor, learned the trade at LA Trade-Technical College and spent years on remodels where the difference between a substrate that lasts and one that fails was the whole job. That same nose for what’s underneath the surface is what he brings to fence work here. We stock genuine Jerith panels, posts, caps, and hinges locally so a repair doesn’t stall waiting on a shipment. And because we’re already pulling permits for additions and exterior work in Mountain View, we understand how the city’s review process affects fence setbacks and post placement along property lines.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Mountain View
- Loose aluminum picket rails on Eichler lots. The original shallow footings near slab-adjacent soils don’t grip well after years of seasonal ground movement, and Jerith aluminum rails work loose at hinge and post brackets. We reset posts in clean soil off the slab edge where we can.
- Racked vinyl privacy panels on narrow side yards. In mid-century Mountain View lots, side yards run tight against property lines, and when adjacent slab work or trenching settles, Jerith vinyl panels bow and rack. We re-align rails, reset posts, and replace panels where the structure has been compromised.
- Sagging Jerith aluminum gates. Bay fog and winter wet corrode the original hinges, and once the hinge pin wears, the latch stops aligning. We replace with genuine Jerith hinges or better aftermarket hardware and re-hang the gate plumb.
- Heaved or pulled post footings after wet winters. Flat rancher lots sit on fill that shifts when rain concentrates between November and March. Shallow footings heave, and the post pulls the panel line out of level. We dig to proper depth and re-set in compacted base.
- Fence work that threatens radiant-heat loops. Any trenching near a slab-on-grade Eichler risks cutting the original in-slab copper tubing. We probe and map the layout before we dig, which most out-of-town crews simply don’t do.
Jerith Service in Mountain View: What Local Conditions Mean for Your Equipment
Mountain View’s 94040 and 94041 ZIPs are dense with slab-on-grade Eichlers and ranchers built between the 1940s and 1960s, and a surprising number still run on original radiant-heat copper tubing embedded in the concrete. That matters for Jerith owners because a fence, gate, or addition footing that calls for trenching near the slab can rupture those loops in one bad pass. We had a homeowner near Monta Loma who wanted a new Jerith aluminum privacy run along a side yard, and our crew hit the telltale sign of in-slab radiant tubing where the old gate post sat. We re-routed the post footings off the slab edge, set them in clean soil, and used Jerith aluminum panels and a matching gate with fresh hinges, giving them a plumb, code-clear fence without touching the heating loop. A generic fence crew would have dug right through it. That single detail, probing the slab before trenching, is what separates a Jerith install in Mountain View from one in a neighboring city with different housing stock. Add in a permit culture shaped by big-tech employers and vocal neighbors, and you start to see why knowing the local review process matters as much as knowing the product.
Jerith Models & Products We Service in Mountain View
We install and repair the full Jerith residential lineup in Mountain View, including Jerith repair in Los Altos and nearby areas: Signature Series aluminum ornamental fence, Elite vinyl privacy fence, ProSeries vinyl privacy fence, and Jerith aluminum pool-code railing. When a section is still structurally sound, we use genuine Jerith replacement parts, panels, posts, caps, and hinges, to extend the run. Where aftermarket hardware is equal or better, we’ll say so and use it. When corrosion, racking, or failed footings have compromised the structure, we recommend replacement rather than chasing repairs that won’t hold. Since we’re working in Mountain View weekly, common Jerith parts are stocked locally, which keeps turnaround shorter than waiting on a distributor shipment.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Mountain View
| Jerith Service | Typical Range in Mountain View |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Home Addition (fence-related scope) | $45,000 – $130,000 |
What drives the price on a Mountain View Jerith project is usually the footing work, especially when we’re near a slab with radiant heat, and the permit review time. A vinyl privacy run on a flat rancher lot with clean soil lands on the lower end; an aluminum ornamental fence with pool-code railing and re-set posts on a settling Eichler lot lands higher. Your free estimate includes a site walk, a written line-item quote, and a look at what’s under the ground before we commit to a price. Call (866) 253-5808 for an exact quote; estimates are free and there’s no obligation.
Serving Mountain View, CA — Our Local Coverage Area
We’re based in the Mountain View area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Mountain View
It can, if the crew doesn’t check first. We probe and map the in-slab copper layout before any trenching near a slab edge, so we know where the loops run and where a footing can go without cutting them. That’s standard practice on every Mountain View job we do, and it’s why we’ve never ruptured a radiant system on a fence install. Call (866) 253-5808 to schedule a site check.
Mountain View’s review culture is shaped by vocal neighborhood input and a planning department used to high-stakes projects, so even a fence can get scrutinized for setback compliance and visual impact. We prepare plans that match the city’s expectations the first time, which keeps the review from dragging. For any Jerith fence or gate that needs a permit, we pull it and stand behind the inspection.
Most of the time it’s post movement, not a panel defect. In narrow mid-century side yards, posts set close to property lines take on settling from adjacent slab work and trenching, and the rails rack as a result. We reset the posts in compacted base off the slab edge where possible and replace panels that have taken a permanent set. Call (866) 253-5808 and we’ll tell you if it’s a repair or a replacement after seeing it.
Yes, where they extend the life of a sound run, we use genuine Jerith panels, posts, caps, and hinges. Where aftermarket hardware is equal or better, we’ll use that and tell you why. If corrosion or failed footings have compromised the structure, we’ll recommend replacement rather than patching it.
Fog and winter wet accelerate corrosion on uncoated hinge hardware and can delay exterior finishes along the bayside edge of Mountain View. That’s why we use coated or stainless hardware on aluminum gates and schedule vinyl work when surfaces are dry enough to set properly. For a Mountain View-specific quote, call (866) 253-5808.
Service Areas Near Mountain View
We run Jerith service into the surrounding Bay Area communities: Jerith service in Loyola covers the town’s mid-century custom lots, and Jerith service in Sunnyvale reaches the neighboring post-war subdivisions. We also cover Palo Alto and Los Altos, where the housing stock and slab conditions match much of what we see in Mountain View. For full local coverage details, see our Mountain View service area page.
Book Your Jerith Service in Mountain View Today
If your Jerith fence, gate, or railing needs work, call (866) 253-5808 for a free estimate. We’ll walk the site, check the slab and soil conditions, and give you a written line-item quote before any work starts. Nelson and the team at Timberline Contractors are ready when you are.
Written by Nelson Fung, Owner at Timberline Contractors, providing Jerith sales & service to Mountain View and the surrounding Bay Area.