Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Palm Springs, CA | Timberline Contractors
Mr-Glass service in Palm Springs comes down to one question for most mid-century homeowners: can you replace the glass without wrecking the profile the city design review board expects to see? We can. Timberline Contractors handles Mr-Glass window, door, and enclosure work across 92262, 92263, 92264, and 92292 as an independent service provider, not an authorized dealer. If your aluminum frames are failing in the desert heat, call (866) 253-5808 for an honest assessment on whether repair makes sense or full replacement is the smarter move.
Why Palm Springs Residents Choose Us for Mr-Glass Service
We work on 1950s through 1970s desert modernism every single week, which means we see Mr-Glass Series 2700 and 2800 aluminum windows, sliding patio doors, and bath enclosures the way they actually behave after fifty years of 110°F summers and blowing sand. Nelson Fung, our owner and general contractor, learned the trade at Los Angeles Trade-Technical College before spending years on remodeling and commercial builds across the LA basin. He brings that same eye for how materials fail back to every Palm Springs Mr-Glass sales & service call we run. The point is simple: we know what these systems look like when the gaskets petrify, when the rollers fill with grit, and when the frame itself has outlived the glass inside it. Most Palm Springs homeowners want an answer, not a sales pitch. We give you the answer, then you decide.
Styles & brands we work with







Common Mr-Glass Construction Problems We Solve in Palm Springs
Here is what we see most often on Mr-Glass units in this city:
- Sealant and glazing gasket failure on south- and west-facing glazing. Palm Springs sun is relentless. On clerestory windows and full-height Mr-Glass glazing panels, UV plus summer heat hardens the gaskets inside the aluminum frame until they shrink and pull away. Water traces along the frame stops and finds the header. We see this on almost every original 1960s clerestory we open up.
- Sliding patio door rollers packed with desert grit. Wind-driven sand works its way into Mr-Glass slider tracks, grinds against the rollers, and within a few seasons the door sticks or drags. Homeowners in Deepwell and the south-end 92264 country club tracts report the same pattern: smooth in October, stiff by June.
- Seal failure in dual-pane Mr-Glass picture windows. Thermal cycling on large fixed panels, especially unshaded glass, causes the seal between panes to let go earlier than anyone expects. Haze and fogging between glass layers signals failed insulated glass unit, not just a dirty window.
- Water behind the frame, not through the glass. Flat and butterfly roofs on Palm Springs mid-century homes have no attic to slow a leak down. Water reaches window headers above Mr-Glass openings fast. By the time the homeowner sees a stain, the rot behind the frame is already underway. We open the wall, replace the framing as needed, re-flash, and reset the unit.
- Frameless Mr-Glass shower enclosures with worn hinges and fogged glass. Hard water vapor and extreme bathroom heat cycles accelerate wear on hinge gaskets and leave calcium etching on shower glass. In most Palm Springs homes, the enclosure is original or unchanged since the 1980s, which means worn hardware and tired seals throughout the bath.
Mr-Glass Service in Palm Springs: What Local Conditions Mean for Your Equipment
Mr-Glass installations in Palm Springs live or die by one thing most other cities never think about: the preservation ordinance protecting pre-1970s architecture. Palm Springs maintains design review over alterations to mid-century modern homes, and windows and glazing changes on protected properties can require approval to keep the original character intact. That means when we replace a failing Mr-Glass Series 2700 on a 1962 post-and-beam in the Deepwell neighborhood, we are matching the original profile, sightline, and mullion pattern to what the city will accept, not just ordering the highest-performing unit off the shelf. The glass spec, the frame color, the division of lites, it all matters to the review board. Many Palm Springs homeowners are surprised by this. We are not. Our team navigates the design review process on protected homes routinely, so the Mr-Glass replacement you get is one the city will clear and the house will wear well. At a 1962 post-and-beam home in Deepwell with original clerestory and full-height Mr-Glass aluminum glazing, our crew found hardened, failed gaskets tracking water into the header. We matched the profiles, re-flashed the openings, reset the patio slider on new rollers, and the owner’s west-facing thermal readings dropped noticeably. That is Palm Springs service area work done the way this city demands.
Mr-Glass Models & Products We Service in Palm Springs
We handle Mr-Glass Series 2700 and 2800 aluminum sliding and single-hung windows, the standard and low-profile threshold sliding glass patio door systems, frameless and semi-frameless shower enclosures, and custom mirror or architectural glass panels cut to field dimensions. Parts matter. For profiles still supported, we use OEM Mr-Glass rollers, gaskets, and hardware when available. For discontinued profiles, we go with quality aftermarket equivalents we have tested. We are straight with you when a 30 to 50-year-old aluminum unit is done, because in this climate, re-glazing a compromised frame usually costs more than a properly matched replacement. We keep common rollers and gaskets in local supply to speed up Mr-Glass repair in Cathedral City and Palm Springs turnaround.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Palm Springs
What you pay depends on scope. A single slider roller replacement is one thing. A full window replacement with design review compliance is another. Here are the ranges we quote most in Palm Springs:
| Service | Typical Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Frameless Glass Shower Enclosure | $4,500 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
Material choice, frame condition, design review fees, and labor to correct hidden header rot all move the number. Every job starts with a free written estimate and line-item pricing. Call (866) 253-5808 to schedule yours, no job too small, no obligation.
Serving Palm Springs, CA — Our Local Coverage Area
We’re based in the Palm Springs area and know this community well, including Rancho Mirage Mr-Glass service. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Palm Springs
Yes, in many cases. If your home is protected under Palm Springs’ preservation ordinance for pre-1970s architecture, window and glazing changes may require design review to confirm the replacement matches the original character. We handle this paperwork and spec windows accordingly. Call (866) 253-5808 and we can tell you whether your property triggers review before you spend a dollar.
Heat expands the aluminum, and desert grit packed into the rollers makes the drag worse. What felt tolerable in March seizes up by July. We clean the tracks, replace worn Mr-Glass rollers, and adjust the door so it glides in every season. If you are tired of wrestling your slider, call (866) 253-5808 for a free estimate.
It means the insulated glass unit seal has failed. We do not repair fogged units; we replace the glass pack and re-set it in the frame. If the frame itself is still sound, that is often the most economical fix. If the frame is failing too, replacement makes more sense. We will tell you which is which after an inspection, no charge.
High bathroom heat cycles and intense sun exposure accelerate hinge gasket wear and hard water etching on the glass. Enclosures that look fine in photos often have hidden seal decay. We restore or replace Mr-Glass frameless and semi-frameless shower sets with hardware spec’d for desert conditions, and we do the waterproofing behind them correctly the first time, whether in Palm Springs or Garnet Mr-Glass service areas.
No. Timberline Contractors is an independent Palm Springs construction firm and we are not affiliated with, authorized by, or endorsed by Mr-Glass. We are upfront about that before any work begins. What we offer is direct experience with Mr-Glass products in these desert conditions, including Mr-Glass repair in Desert Hot Springs, and honest guidance on repair versus replacement.
Service Areas Near Palm Springs
In addition to Palm Springs, our Mr-Glass service extends to Mr-Glass service in Desert Edge, Mr-Glass service in Sky Valley, and surrounding Coachella Valley communities. We routinely work homes from the foothills to the south end. If you are nearby, call and ask; we likely cover your street.
Book Your Mr-Glass Service in Palm Springs Today
Whether you need a roller replacement or a full mid-century window package, we will tell you straight what the equipment needs and what the city will approve. Call (866) 253-5808 now to schedule your free Mr-Glass estimate in Palm Springs.
Written by Nelson Fung, Owner & General Contractor at Timberline Contractors, serving Palm Springs and the Coachella Valley. Do it right the first time or explain yourself twice.