Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Felton, CA | Timberline Contractors
We provide independent Mr-Glass service across Felton, CA, and the thing that separates our work here is simple: we understand how redwood canopy, fog, and protected root zones change how shower glass performs and how bathrooms get remodeled. We’re Timberline Contractors, led by Nelson Fung, and we’ve installed and serviced Mr-Glass bath and shower enclosures in Felton’s redwood-country homes long enough to know these units behave differently here than they do ten miles east in Scotts Valley. Need a Mr-Glass enclosure installed, repaired, or replaced? Call (866) 253-5808 for a free estimate.
Why Felton Residents Choose Us for Mr-Glass Service
We work independently of Mr-Glass. That means we’re not an authorized dealer, not a warranty agent, and not tied to a factory script when your shower door starts acting up. What we are is a general contractor that has pulled apart enough Mr-Glass frameless sliders and semi-frameless pivots in Felton bathrooms to know exactly which failures are worth repairing and which ones you should stop throwing money at.
Nelson Fung grew up around hardware stalls and tile yards, trained formally at Los Angeles Trade-Technical College, and spent years on remodels and commercial builds before running Timberline Contractors. His rule, which our crew hears constantly: “Do it right the first time or explain yourself twice.” In Felton, that means not just swapping a roller and calling it done when the real problem is a frame that’s pitted through from fog-belt humidity. We match OEM Mr-Glass hinges, rollers, sweeps, and seals when the glass geometry is sound. We use quality aftermarket hardware only when OEM pieces are discontinued or painfully slow to source. And when a frame is corroded past saving or the tempered edge is chipped at a cutout, we tell you straight that replacement beats repeated repair. We serve all of Felton, ZIP 95018.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Felton
- Fog-belt corrosion on aluminum frames. Felton sits under a redwood canopy that holds humidity high year-round. Aluminum channel frames pit, factory finishes chalk, and pivot hinges bind until the door stops self-closing. We see it most on older Mr-Glass semi-frameless pivots in bathrooms that don’t get enough ventilation. The frame corrodes from the bottom channel up, and by the time the door sticks, the damage is usually structural.
- Moss and mildew migrating through silicone joints. The damp microclimate here means moss finds its way into bottom-sweep silicone faster than anywhere we work. Water creeps under the curb and into pier-and-beam subfloor framing before you see any staining inside. By the time a homeowner notices a dark line along the track, the subfloor has often been wicking moisture for months.
- Settlement twist in older wood-frame bathrooms. Felton’s older homes sit on piers or raised foundations. Framing moves. Semi-frameless panels rack out of square, sliding doors jump track, and tempered glass edges chip at the pivot cutouts. We re-square openings and re-hang panels so the glass isn’t fighting the structure.
- Grit-accelerated roller and track wear. Redwood duff and decomposed granite from Felton yards track into bathrooms on shoes and paws. That grit chews up rollers and tracks fast, especially on frameless sliders. Doors start dragging, then the glass stresses at the hinge point. Replacing rollers early is cheap. Ignoring the drag until the glass chips at the cutout is not.
- Fogged or etched glass from hard water and mineral buildup. Felton’s well water and the constant fog leave mineral deposits that etch glass over time. Once the surface is etched, polishing is a gamble. We’ll tell you when replacement glass is the only real fix and when a deep clean and reseal will buy you more years.
Mr-Glass Service in Felton: What Local Conditions Mean for Your Equipment
Here’s something that catches Felton homeowners off guard: many bathrooms here sit inside protected redwood root zones, so even a shower-glass swap can require pier-based or hand-dug work near the foundation. This is a Santa Cruz County permit condition that rarely applies in Scotts Valley or Santa Cruz. What it means for your Mr-Glass enclosure is that a simple door replacement sometimes turns into a structural call. We’ve hand-set blocking and re-squared openings instead of cutting into slabs, because the county will not let you sever a protected root to make a shower curb sit pretty. On a bathroom off Graham Hill Road, our crew replaced a fogged-over Mr-Glass semi-frameless pivot where the aluminum frame had pitted and the door had stopped latching. The bathroom wall backed onto a protected redwood’s root zone, so we hand-set new blocking and re-squared the opening rather than cutting into the slab, then installed a frameless Mr-Glass panel with fresh sweeps. The door now swings and seals cleanly, and no water reaches the pier framing below. That’s the kind of constraint you plan around when you have worked in Felton for years. Builders who mainly work flatter, drier lots don’t think about it until the inspector shows up.
Mr-Glass Models & Products We Service in Felton
We service and install the full range of Mr-Glass bath and shower enclosures: frameless sliding shower door systems, semi-frameless pivot shower doors, Neo-Angle corner shower enclosures, and custom-cut tempered glass panels and mirrors. For Felton turnaround, we keep common OEM-compatible Mr-Glass hinges, rollers, sweeps, and seals on hand so most repairs happen in one visit. When a part is discontinued, we source a quality aftermarket equivalent that matches the original geometry, rather than making the glass adapt to whatever is cheaply available. If you’re building or remodeling, we also handle the full bathroom scope around the glass: walk-in showers, tub-to-shower conversions, small bathroom remodels, vanities, tile, waterproofing, and Schluter-system substrate work. One contractor from the curb to the shower door, instead of three trades pointing fingers at each other.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Felton
Here’s what Mr-Glass-related work typically runs in Felton. These ranges reflect the labor and material realities of the 95018 market, including the root-zone constraints we mentioned.
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
Your actual cost depends on glass panel size, frame condition, whether the opening needs re-squaring, and whether the redwood root zone forces pier-based work. Every estimate is free, written, and line-itemed. Call (866) 253-5808 and we’ll give you exact numbers for your bathroom, not a ballpark printed on a flyer.
Serving Felton, CA — Our Local Coverage Area
We’re based in the Felton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Felton
Yes. Out-of-level floors are the norm in older Felton homes, not the exception. We shim, re-square, or re-block the opening before the glass goes in, because a frameless panel installed out of square will chip at the cutouts and jump track within months. Where root-zone restrictions apply, we hand-set the blocking rather than cutting into the slab. Call (866) 253-5808 for a free assessment of your specific opening.
Felton’s fog and redwood canopy keep humidity high, and aluminum frames pit faster than they do in drier parts of the county. The factory finish chalks first, then the metal starts pitting from the bottom channel up. The fix is either a corrosion-resistant replacement frame with better ventilation, or going frameless so there’s no aluminum to corrode. We’ll tell you which makes sense for your bathroom and your budget. Call (866) 253-5808 for an estimate.
Yes, and it can add both cost and time. Santa Cruz County will not let you sever protected roots for conventional excavation, so we use pier-based or hand-dug methods near the foundation. That affects shower-pan depth, curb height, and sometimes drain placement. We plan for it from day one so you don’t get a stop-work order mid-project. Call (866) 253-5808 and we’ll explain what applies to your lot.
Yes. We’ve converted tubs in some very tight Felton bathrooms, including homes off Graham Hill Road where a standard 60-inch enclosure was not in the cards. We spec Mr-Glass panels cut to the actual opening dimensions, often a Neo-Angle or a custom sliding configuration, and we work with the existing plumbing to avoid moving drains unless it’s necessary. Call (866) 253-5808 to talk through your space.
First, don’t just caulk over it. The moss is feeding on moisture that’s already inside the joint, and covering it traps the problem. We remove the old silicone, treat the area, replace the bottom sweep, and re-seal with a mildew-resistant product rated for high-humidity environments like Felton’s. If water has already reached the subfloor, we’ll open a section and check the framing. Call (866) 253-5808 for a proper fix rather than a cosmetic one.
Service Areas Near Felton
We serve Felton and the surrounding Santa Cruz County communities, including Mount Hermon, Scotts Valley, and the San Lorenzo Valley corridor. If you’re in one of those areas, see our dedicated pages: Mr-Glass service in Mount Hermon and Mr-Glass service in Scotts Valley. Or check out our full Felton service area coverage for more detail on where we work.
Book Your Mr-Glass Service in Felton Today
Whether your Mr-Glass door is corroding, dragging, chipping, or you’re ready to tear out the tub and go frameless, we’ll give you a straight answer and a written quote. Call (866) 253-5808 to schedule your free estimate in Felton. For more on the Mr-Glass work we do across the region, see our Mr-Glass sales & service page.
Written by Nelson Fung, Owner & General Contractor at Timberline Contractors, serving Felton and the San Lorenzo Valley since 2005.