Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Lexington Hills, CA | Timberline Contractors
We provide independent Mr-Glass shower enclosure installation, repair, and tub-to-shower conversions across Lexington Hills. The work here is different than flat-lot jobs in San Jose because redwood shade, steep slopes, and damp wall cavities change how glass panels, hinges, and seals behave over time. If you’re planning a walk-in shower or dealing with a Mr-Glass door that’s started to stick, chip, or leak, call (866) 253-5808 for a free estimate. Nelson Fung and our Timberline Contractors crew have serviced Mr-Glass enclosures through years of mountain-home remodels in the Santa Cruz range, and we know what holds up when the ground shifts and the canopy keeps things wet. We’re an independent contractor, not a manufacturer-authorized shop, which means we recommend fixes based on what actually works in Lexington Hills, not what a brand playbook says.
Why Lexington Hills Residents Choose Us for Mr-Glass Service
Most shower-door repair calls in Lexington Hills are not about the glass at all. They’re about what the house did to the glass: a hinge that seized because the shaded bathroom never fully dried, a panel that drifted out of plumb after a wet winter moved the footings, a silicone seal that failed at the wall joint because moisture wicked behind the tile. We’ve worked on Mr-Glass frameless hinged doors, semi-frameless sliders, neo-angle corners, and low-iron starphire enclosures in enough Lexington Hills bathrooms to know which failure shows up where.
Nelson grew up around tile and materials in Los Angeles and learned the trade at LATTC before spending years on remodels from Eastside bungalows to commercial builds. What that means for your shower: he will explain why a moisture-tolerant backer board behind the tile matters more than the finish on the hardware, and why re-squaring a wall opening before hanging a frameless panel saves you a re-seal call next winter. We carry Mr-Glass OEM hinges, pivots, sweeps, and seals when the original profile is still supported, and quality stainless aftermarket hardware when it isn’t. You get the right part for the conditions, not whatever is closest on the truck.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Lexington Hills
Here’s what we see most often on Mr-Glass enclosures in this part of the Santa Cruz Mountains:
- Hinge and pivot corrosion from redwood shade. Dense canopy means bathrooms stay humid longer after storms. Mr-Glass pivot hardware that would dry out in a Sunnyvale tract home stays wet here, and wet hinges seize. We replace with OEM pivots when available, or upgrade to marine-grade stainless aftermarket hardware when the original profile is discontinued.
- Silicone seal failure at the wall-to-glass joint. Hillside humidity wicks moisture behind tile and into the wall cavity. The seal at the fixed panel starts to lift, then water gets where it shouldn’t. We strip the old silicone, inspect the backing, and re-seal only after confirming the substrate is sound.
- Frameless panel creep on settling foundations. Lexington Hills homes sit on sloped, engineered footings that move during wet winters. A Mr-Glass frameless door that swung clean last summer starts dragging or gap-printing at the strike edge after the ground shifts. We re-level the panel and adjust the hinge geometry before the edge chips.
- Tempered glass edge chipping at notches and cutouts. Older mountain bathrooms are rarely square. When a Mr-Glass panel was forced to fit an out-of-square opening, the notched corners carry stress. Chipped edges cannot be repaired safely; we replace the panel and correct the opening tolerance before the new glass goes in.
- Degraded vinyl sweeps on swinging doors. The bottom sweep on a hinged Mr-Glass door cracks and hardens with repeated moisture exposure. A failed sweep lets water run onto the bathroom floor and accelerates the seal failure above it. We replace sweeps as part of any hinge or seal service.
Mr-Glass Service in Lexington Hills: What Local Conditions Mean for Your Equipment
The thing about Lexington Hills is that it’s not just wet, it’s persistently wet under the trees. Dense redwood canopy blocks the drying sun, so after a winter storm, the shaded side of a house can stay damp for weeks while a sunny Los Gatos lot is bone-dry in two days. For Mr-Glass owners, that means the wall cavity behind the shower enclosure is the part that fails first, not the glass. Moisture wicks from the bathroom into the substrate behind the tile, the silicone at the wall joint loses adhesion, and then the seal fails from the inside out. We learned this the hard way on a steep wooded parcel off a Lexington Hills ridge road, where our crew converted an old tub alcove to a walk-in shower and set a frameless Mr-Glass hinged enclosure with low-iron glass. The original wall was out of plumb and the shaded cavity was damp, so we re-squared the opening and added moisture-tolerant backing before hanging the door, then adjusted the pivot so it swung clean against the new tile. That job taught us to spec ventilation and a dry substrate before we ever hang a frameless Mr-Glass panel here. It’s the difference between a shower that lasts fifteen years and one that needs a re-seal every spring.
Mr-Glass Models & Products We Service in Lexington Hills
We install and repair the full Mr-Glass enclosure range: frameless hinged shower doors with 3/8-inch clear tempered glass, semi-frameless sliding tub-shower enclosures, low-iron starphire frameless enclosures, and neo-angle corner shower enclosures for tighter Lexington Hills bathrooms. Our approach on parts is straightforward, independent, and not brand-driven. We use Mr-Glass OEM hinges, pivots, sweeps, and seals when the original hardware profile is still supported, and quality aftermarket stainless hardware when it isn’t. When glass is chipped at the edge or a panel has drifted beyond adjustment, we recommend replacement over repeated re-sealing, because shaving a few hundred dollars now costs you a failing seal every year. Our Mr-Glass sales & service page covers the full repair-versus-replace decision tree, but for Lexington Hills specifically, the damp-shade factor shortens the lifespan of every seal and sweep.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Lexington Hills
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
Steep-lot access, out-of-plumb wall corrections, and moisture-tolerant backing upgrades push labor toward the upper end of these ranges, which is why we give a written line-item quote after seeing the bathroom, not over the phone. Every estimate includes labor, materials, hardware, and disposal. Call (866) 253-5808 to schedule yours, free.
Serving Lexington Hills, CA — Our Local Coverage Area
We’re based in the Lexington Hills area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Lexington Hills
Are you authorized by Mr-Glass?
No. Timberline Contractors is an independent general contractor that installs and services Mr-Glass enclosures. We are not authorized, sponsored, or endorsed by Mr-Glass. That independence means we recommend repairs and replacements based on what works in Lexington Hills conditions, not what a manufacturer program requires.
Do you use OEM or aftermarket parts for Mr-Glass hardware?
Both, depending on what’s available. When the original Mr-Glass hinge, pivot, sweep, or seal profile is still supported, we use OEM. When it’s discontinued or unavailable, we use quality stainless aftermarket hardware that matches or exceeds the original spec. We’ll tell you which one we’re quoting and why.
How long does a walk-in shower and Mr-Glass enclosure take on a sloped Lexington Hills lot?
Most walk-in shower installs with a Mr-Glass enclosure run five to ten working days, but sloped-lot access, out-of-plumb wall corrections, and wet-substrate repairs can add two to three days. We confirm the timeline after we see the site. Call (866) 253-5808 for a project-specific estimate; estimates are free.
Which Mr-Glass models do you service?
We service frameless hinged doors with 3/8-inch clear tempered glass, semi-frameless sliding tub-shower enclosures, low-iron starphire frameless enclosures, and neo-angle corner enclosures. If you have a Mr-Glass product not listed here, ask us; we’ll tell you honestly whether it’s serviceable.
What does a Mr-Glass enclosure repair cost in Lexington Hills?
Hardware-only repairs (hinges, pivots, sweeps, seals) typically fall between $300 and $800 depending on parts and access. Panel replacement runs higher, usually $1,200 to $3,500 for a frameless panel with labor. For an exact number on your enclosure, call (866) 253-5808 for a free written quote.
Service Areas Near Lexington Hills
We serve the whole Lexington Hills service area and the surrounding Santa Cruz Mountain communities. If you’re in Mr-Glass service in Brookdale, Mr-Glass service in Lompico, Ben Lomond, or Felton, the same crew and the same Mr-Glass expertise apply. Steep lots and redwood shade don’t stop at the ZIP line.
Book Your Mr-Glass Service in Lexington Hills Today
Call (866) 253-5808 to schedule a free estimate for Mr-Glass installation, repair, or tub-to-shower conversion in Lexington Hills. We’ll assess the enclosure, the wall cavity, and the site access, then give you a written line-item quote.
Written by Nelson Fung, Owner & General Contractor at Timberline Contractors, serving Lexington Hills and the Santa Cruz Mountains with Los Gatos Mr-Glass service.