Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Daly City, CA | Timberline Contractors
CGI cabinet service in Daly City means dealing with fog, shifting dune sand, and decades-old out-of-square walls. We’re an independent CGI provider, not authorized or sponsored by the manufacturer, so our advice is based on what your house actually needs, not what a brand rep wants us to push. We install, repair, reface, and replace CGI cabinetry across all four Daly City ZIP codes, 94014 through 94017. Call (866) 253-5808 for a free estimate on any CGI job, from a single hinge replacement to a full kitchen remodel.
Why Daly City Residents Choose Us for CGI Service
Most cabinet crews don’t think about what Daly City fog does to a particleboard box. We do, because we’ve been inside enough of these houses to see it happen. Nelson Fung grew up around material suppliers and learned the trade at Los Angeles Trade-Technical College, and he’s the kind of contractor who will tell you exactly which repair will hold and which one will fail in three years on a damp hillside. Our team brings that same scrutiny to every CGI service call in Daly City. We carry OEM hinges, slides, and replacement doors for common CGI lines, and we keep moisture-rated aftermarket options on hand when the original parts are undersized or discontinued. Do it right the first time or explain yourself twice. That’s the standard we work to, whether we’re re-hanging a sagging door or rebuilding a cabinet run that’s been sitting against a fog-wet wall for two decades.
Styles & brands we work with
Common CGI Construction Problems We Solve in Daly City
Here’s what we see on repeat in Daly City kitchens, and what we do about it:
- Thermofoil delamination at the bottom rails. Daly City’s near-constant fog keeps cabinet bases damp, and CGI thermofoil door skins start peeling where the moisture collects. We replace the affected doors and isolate the base from further moisture rather than just gluing the skin back down, which never holds.
- Swollen particleboard sink cabinets. Original galvanized plumbing in 1940s-to-1970s homes develops slow leaks at the supply lines. By the time you notice, the cabinet floor under the sink has absorbed water for months or years. We pull the box, dry the cavity, and install a repaired or new CGI base on a vapor-gapped, shimmed platform.
- Rusted hinges and seized drawer slides. Chronic under-sink moisture and coastal air corrode hardware fast. We swap in OEM or upgraded aftermarket hardware rated for humid coastal environments, and we adjust the door reveals so nothing rubs.
- Doors that rub or won’t close square. Daly City sits on steep dune sand, and the shallow footings under these older homes shift over decades. Wall cabinet runs rack slightly, doors bind, and drawers stick. We re-shim the boxes, correct the reveals, and if the carcass is sound, we don’t sell you a replacement you don’t need.
- Crumbling cabinet floors along exterior walls. Fog-belt moisture wicks through stucco and into the wall cavity behind the cabinets. The MDF or particleboard floor of the box is the first thing to go. We rebuild the base with sealed edges and an air gap, then reset the cabinets so they’re not sitting directly against a damp wall.
CGI Service in Daly City: What Local Conditions Mean for Your Equipment
On the terraced streets of the Westlake hills, we routinely find rear retaining walls slowly moving on shifting dune sand, and the same movement shows up inside the kitchen. Daly City’s housing stock is almost entirely stucco-over-wood-frame on narrow sloped lots, and the shallow footings under these 1940s through 1970s homes settle unevenly. A cabinet side that was plumb when the house was built is now leaning half a degree out, and that’s enough to make every door on an eight-foot CGI run look crooked. The problem isn’t the cabinet. The problem is the floor and the wall behind it. That’s why a proper CGI installation in Daly City starts with checking the plane of the wall and the level of the floor before any box gets hung. On a terraced street in Westlake, a kitchen estimate turned into more when we pulled the original CGI cabinets and found the rear wall cavity soaked and the base cabinets swollen from years of fog-driven moisture and a slow galvanized supply leak. We dried and re-flashed the wall, replaced the compromised cabinet bases with new CGI boxes set on a moisture-isolated shimmed base and vapor gap, and finished with a quartz top. The homeowner finally had drawers that closed square on a floor that had settled over the dune sand.
CGI Models & Products We Service in Daly City
We work on the CGI cabinet lines most commonly installed across Daly City kitchens: the Allure series framed cabinetry, the Brookhaven-style raised-panel oak and maple lines, Euro-style full-overlay thermofoil cabinets, and the white and antique-finished shaker lines from the 1990s and 2000s remodel wave. When a box is still square and solid, we repair with CGI OEM hinges, slides, and doors. Where the original hardware was undersized or has long been discontinued, we fit quality aftermarket parts that will actually survive coastal humidity. For fast turnaround in the 94014 through 94017 ZIP codes, we stock the most frequently needed hinge styles, replacement bumpers, and moisture-isolation supplies locally rather than waiting on a distributor. If you’re researching the brand itself, our CGI sales & service page covers the full scope of what we do with the product line.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Daly City
| Service | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What moves the number is the condition of the wall and floor behind the cabinets, whether galvanized supply lines need replacement while everything’s open, and whether the existing boxes are salvageable or past the point of repair. Your free estimate covers an on-site look at all of that, with a written line-item quote so you can see exactly where the money goes. Call (866) 253-5808 to schedule yours.
Serving Daly City, CA — Our Local Coverage Area
We’re based in the Daly City area and work with our General Contractor in Daly City to serve this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Daly City
Why do my CGI cabinets feel damp and smell musty at the base?
That dampness is almost always Daly City fog moisture wicking through an exterior wall, or a slow galvanized supply-line leak inside the cabinet base. We find the source, dry and re-flash the wall, and rebuild the cabinet base with a vapor gap so the new or repaired box doesn’t sit against a wet surface. Call (866) 253-5808 and we’ll pull the toe kick and look.
Can you reface my CGI cabinets instead of replacing them in a Daly City hillside home?
If the boxes are square and the structure is sound, refacing is a smart way to go. If the floor or wall has shifted with the dune-sand footing settlement, refacing won’t fix doors that rub, and we’ll tell you that up front rather than waste your money on new skins over a racked carcass. Call (866) 253-5808 for an honest assessment, not a sales pitch.
My kitchen wall is out of level – will new CGI cabinets fix that?
New cabinets won’t fix an out-of-level wall, and any installer who says otherwise is setting you up for doors that bind. We shim and true the run to the existing wall and floor, and we correct the reveals so the finished install looks right even when the structure behind it isn’t. It’s standard practice on Daly City hillsides, but only if your contractor takes the time.
Do you handle the countertop and backsplash with a CGI cabinet install?
Yes, we run the entire kitchen scope under one contract: cabinet installation or refacing, quartz or granite countertops, and the backsplash. That matters on a tight Daly City lot where coordinating separate trades gets complicated fast.
Is a full kitchen remodel realistic on a tight Daly City lot?
It’s realistic, but it needs planning around access, drainage, and whatever’s hiding behind the original stucco. Our service area covers all of Daly City, and we sequence the work so you’re not living around a construction zone any longer than necessary. Call (866) 253-5808 for an exact quote, which is always free.
Service Areas Near Daly City
We handle CGI cabinet work throughout Daly City and the surrounding peninsula. If you’re over the hill in the CGI service in Marin City area or down in CGI service in Brisbane, we cover those too. Our crews also regularly work San Francisco, the Mission District, and the neighborhoods just south of the Daly City line.
Book Your CGI Service in Daly City Today
Whether it’s one delaminated door or a full kitchen, we’ll look at what you have and give you a straight answer. Call (866) 253-5808 to schedule your free estimate. We serve all Daly City ZIP codes, 94014 through 94017.
Written by Nelson Fung, Owner & General Contractor at Timberline Contractors, serving Daly City with CGI service in Broadmoor and the surrounding peninsula.